DATEQ AUDIO TECHNOLOGIES
Dateq International BV
Landauer 5
3897 AB Zeewolde
The Netherlands
Tel: (+31) (0)36 547 22 22
Email: info@dateq.nl
CHAMBER OF COMMERCE: 84615559
MDM-88DT
€ 679,00 Excl. VAT
Purchases can only be made if you possess a dealer login. Request one through this link.
Description
Introduction
This XLR audio bridge is a Dante® transceiver. It features eight analog inputs and eight analog
outputs. It interconverts between XLR analog audio and Dante® digital audio.
The analog input adopts XLR/TRS combination port, which supports both balanced and
unbalanced audio input. Analog input supports 48V phantom power supply and 6-level
sensitivity adjustment, while analog output supports 5-level output adjustment.
This audio bridge built-in audio signal processing for gain, equalizer and delay control. It is
simple to configure and operate via the internal Web GUI or the standard Dante® Controller
software. It supports Dante® primary and backup networks, and can be backed up through
backup networks. This product can be powered by dual PoE+ (Power over Ethernet) and local
DC power supply.
Features
☆ 8x balanced analog inputs on XLR, supporting XLR/TRS combo connection
☆ 8x balanced analog outputs on XLR
☆ Dante® 8×8 and AES67 audio input/output supported
☆ Supports balanced/unbalanced analog audio input and output
☆ 2x RJ45 Dante® connectors with redundancy and dual PoE+, supporting Dante® primary
and backup networks
☆ Each input supports +48V phantom power
☆ Adjustable global 0dBFS line up selection (6-level input sensitivity adjustment: -35dBV/
-18dBV/0dBV/+4dBu/+14dBu/+24dBu; 5-level output adjustment: +20dBu/+14dBu/
+4dBu/0dBV/-18dBV)
☆ Built-in audio DSP processing for sensitivity, gain, 8-band PEQ and delay control
☆ Audio input and output support 8 band PEQ adjustment (with +15dB/-15dB gain), and a
maximum of 50ms delay setting
☆ Dante® audio supports: 44.1kHz, 48kHz, 88.2kHz, and 96kHz sampling rates @ 16/24bit
☆ Dante® audio delay supports settings of 2, 3, 4, 5, 10ms
☆ Configuration using internal Web GUI or Dante® Controller
☆ Powered by PoE+ or local DC power supply
☆ Standard 1U 19” rack-mount form factor
Package Contents
① 1x 8×8 XLR Audio Bridge with Dante® and PoE+
② 1x 12V/2.5A Locking Power Supply with Optional Multinational Conversion Plug
③ 2x Mounting Ear
④ 8x Machine Screw
⑤ 1x User Manual
Specifications
Technical | |
Network Bandwidth | Dante® Network 1000M |
Audio Latency | Configurable Dante® device latency: (Supports 2, 3, 4, 5, 10ms configurable using Dante® Controller) |
Audio Format | DANTE [Dante®/AES67 digital audio in/out, PCM 2CH 44.1K- 96KHz, 16/24Bit] LINE IN [Analog audio, Balanced/unbalanced, Max input level 24dBu] MIC IN [Analog audio, Balanced/unbalanced, Min input level -35dBV] LINE OUT [Analog audio, Balanced/unbalanced, Max output level 20dBu, Min output level -18dBV] |
Line/Mic Input Audio | |
Input Impedance | 20K Ohm balanced 10K Ohm unbalanced |
Input Level | Max 24dBu (12.28Vrms) @ balanced line audio Max 18dBu (6.14Vrms) @ unbalanced line audio Min -35dBV (17.78mVrms) @ balanced mic audio |
Line Output Audio | |
Output Impedance | 600 Ohm balanced 300 Ohm unbalanced |
Output Level | Max 20dBu (7.75Vrms) @ balanced audio Max 14dBu (3.875Vrms) @ unbalanced audio |
Frequency Response | 20Hz to 20kHz (-/+0.5dB) |
Dynamic Range | ≥ 105dB@ +4dBu, 1kHzA-weighted |
Audio S/N Ratio | ≥ 105dB@ +4dBu, 1kHzA-weighted |
Audio THD+N | < 0.01% at +4dBu, 1kHz |
Transmission Distance | 328ft/100m (CAT6/6A/7) |
ESD Protection | IEC 61000-4-2: ±8kV (Air-gap discharge) , ±4kV (Contact discharge) |
Connections | |
8x MIC/LINE INPUTS [XLR/TRS Combo, female] [Line analogue audio, Balanced/unbalanced 8CH, Max input level 24dBu] [Mic analogue audio, Balanced/unbalanced 8CH, Min input level -35dBV] 8x LINE OUTPUTS [XLR, male] [Analogue audio, Balanced/unbalanced 8CH, Max output level 20dBu] 1x DANTE PRIMARY [RJ45 locking connector, PoE+/PD (Class 4 IEEE 802.3at)] [Dante/AES67 digital audio in/out, PCM 2CH 44.1K-96KHz 16/24Bit, Web GUI and TCP/IP] 1x DANTE SECONDARY [RJ45 locking connector, PoE+/PD (Class 4 IEEE 802.3at)] [Dante/AES67 digital audio in/out, PCM 2CH 44.1K-96KHz 16/24Bit] 1x DC 12V IN [2-pin DC Locking Power Jack, Max 2.5A] | |
Mechanical | |
Housing Metal Enclosure | |
Color | Black |
Dimensions | 440mm [W]×200mm [D]×44.5mm [H] |
Weight | 2.2kg |
Power Supply | (1) 12V/2.5A 2PIN Locking Power Supply (2) PoE+/PD (Class 4 IEEE 802.3at) |
Power Consumption (Max) | 15.36W (Test with 1Hz sine wave) |
Operating Temperature | 0°C ~ 40°C / 32°F ~ 104°F |
Storage Temperature | -20°C ~ 60°C / -4°F ~ 140°F |
Operating Humidity | 20%~80% (relative humidity, non-condensing) |
Storage Humidity | 10%~90% (relative humidity, non-condensing) |