SPL3TS

Description

The microcontroller in the limiter continuously measures the input signal and attenuates the output as much as necessary to keep the maximum sound pressure below a preset value. Because the SPL limiters are not peak limiters, the dynamics of the music are not affected. As on the SPL2, both input sensitivity (threshold) and output attenuation (output level) can be set. All connectors and controls can be sealed after installation, so they cannot be adjusted afterwards.

The SPL3 has another function. It has a measuring microphone so that the sound pressure of a live band, for example, can also be measured. This makes the SPL3 ideally suited for live performances where the band brings its own equipment. If in live mode the sound pressure level exceeds the preset value, the limiter can give a warning to the band (a flashing light). If the sound pressure level remains too high the limiter will issue a penalty. It is possible to turn off the mains power through this sanction.

Extra compared to the SPL3, the SPL3TS has a built-in clock. This makes it possible to set different sound pressure levels per part of the day. The built-in calendar supports up to 10 dates on which the limiter operates in "bypass" mode. All these settings can be set using the PC software.

Includes DCM-5 Class 2 measurement microphone.

Available accessories:

DCM-6 Class 1 measuring microphone

SRL-1 Stage relay for connecting an indicator lamp and/or interrupting the power supply

Firmware 5.0 update
- Bypass calendar for entering bypass times and dates
- Soft potentiometers for switching off hardware
- Soft range settings dB limits potmeters
- Updated configuration software download via link
- Update available for all existing SPL3TS MK2 models