DATEQ AUDIO TECHNOLOGIES
Dateq International BV
Landauer 5
3897 AB Zeewolde
Nederland
Tel: (+31) (0)36 547 22 22
Email: info@dateq.nl
KVK: 84615559
DDA-70DT
€ 399,00 Excl. BTW
Aankopen kan enkel als je een dealer login bezit. Vraag deze aan via deze link.
Beschrijving
Introduction
This product is designed as a two-channel amplifier using class D amplifier technology. It can
be used for powering low impedance (4Ω/8Ω) stereo systems with a maximum power of 2x
35 Watts or 1x 70 Watts (Mono). It features Dante® 2-channel digital inputs and outputs, and
2-channel balanced or unbalanced analog inputs and outputs.
Analog input supports microphone input as well as 48V phantom power for condenser
microphones. This product built-in audio DSP for gain, mixing, matrixing, equalizer, volume
and delay control. This amplifier can be controlled via RS-232, TCP/IP and Web GUI. This
product is suitable for a vast range of AV installations.
Features
☆ Advanced 70W Class-D audio amplifier with Dante® integration
☆ 2x 35W@4/8ohm, 1x 70W@4/8ohm
☆ Dante® 2×2 and AES67 audio input/output supported
☆ Balanced/unbalanced analog input and output for cascading connection
☆ Dante® 2CH digital audio, balanced or unbalanced line level analog and AMP outputs
☆ Supports microphone input with 48V phantom power
☆ Audio DSP processing includes gain, ducking, mixing, matrixing, equalizer, volume and
delay control
☆ Audio output supports 8 band PEQ adjustment (with +15dB/-15dB gain), and a maximum
of 50ms delay setting
☆ Auto standby mode (0~100 minutes can be set) with signal sensing
☆ Local 5-12V input trigger for disabling amplifier output
☆ Integrated web page function, which can control the local machine and query the working
status of the product through the web page
☆ Supports network control function, slave devices in the same network segment can be
controlled through the set host
☆ Dante audio support: 44.1kHz, 48kHz, 88.2kHz, and 96kHz sampling rates @ 16/24bit
☆ Dante audio delay supports settings of 2, 3, 4, 5 or 10ms
☆ Flexible control via front panel buttons, RS-232, TCP/IP and Web GUI
☆ Power via PoE or local DC power supply (Amplifier power limited when using PoE)
Specifications
Technical | |
Network Bandwidth | 100M |
Audio Latency | Configurable Dante® device latency: (Supports 2, 3, 4, 5 or 10ms configurable using Dante Controller) Configurable AMP/analogue output latency: (0~50ms) |
Output Power | 2x35W@4/8ohm Stereo, 1x70W@4/8ohm Mono |
Amplifier Type | Class D |
Audio Format | Dante® [Dante/AES67 digital audio in/out, PCM 2CH 44.1K-96kHz 16/24Bit] LINE IN [Analog audio, Balanced/unbalanced, Max input level 24dBu] MIC IN [Analog audio, Balanced/unbalanced, Min input level -35dBV] LINE OUT [Analog audio, Balanced/unbalanced, Max output level 2V RMS] |
AMP OUT [Analog audio, Balanced 2CH, Max output power 2x35W @4/8ohm Stereo, 1x70W@4/8ohm Mono] | |
Line/Mic Input Audio | |
Input Impedance | 20K Ohm balanced 10K Ohm unbalanced |
Input Level | Max 24dBu (12.28Vrms) @ balanced line audio Max 18dBu (6.14Vrms) @ unbalanced line audio Min -35dBV (17.78mVrms) @ balanced mic audio |
Line Output Audio | |
Output Impedance | 600 Ohm balanced 300 Ohm unbalanced |
Output Level | Max 2V RMS @ balanced audio Max 2V RMS @ unbalanced audio |
Frequency Response | 20Hz to 20kHz (-/+0.5dB) |
Dynamic Range | >100dB@0dBu, 1kHzA-weighted |
Audio S/N Ratio | >100dB@0dBu, 1kHzA-weighted |
Audio THD+N | < 0.01% at +4dBu, 1KHz |
Audio Output Delay | <1ms |
Transmission Distance | 328ft/100m (CAT6/6A/7) |
ESD Protection | IEC 61000-4-2: ±8kV (Air-gap discharge) , ±4kV (Contact discharge) |
Connections | |
Input | 1x MIC/LINE IN [6pin-3.5mm phoenix connector] |
Output | 1x LINE OUT [6pin-3.5mm phoenix connector] 1x 4/8Ω AMP OUT [4pin-5.08mm locking phoenix connector] |
Control | 1x RS-232 [3pin-3.5mm phoenix connector, API commands control] 1x TRIGGER [2pin-3.5mm phoenix connector, high/Low level configurable to disable amp out] 1x DANTE/IP [RJ45 connector, PoE+/PD (Class 8 IEEE 802.3bt)] [Dante/AES67, Web GUI and TCP/IP] |
Mechanical | |
Housing | Metal Enclosure |
Color | Black |
Dimensions | 180mm [W]×118mm [D]×28mm [H] |
Weight | 670g |
Power Supply | (1) 36V/2.5A 4PIN Locking Power Supply (2) PoE++ Type 4 Class 8 |
Power Consumption (Max) | 95W (Test with 1k sine wave, audio amplifier output is connected to 4Ω resistance) |
Operating Temperature | 0°C ~ 40°C / 32°F ~ 104°F |
Storage Temperature | -20°C ~ 60°C / -4°F ~ 140°F |
Operating Humidity | 20%~80% (relative humidity, non-condensing) |
Storage Humidity | 10%~90% (relative humidity, non-condensing) |